Technical Support Staff
 
HDS Machine
HDS Amplifier and Inverter Settings:
 
“Open Series”
How to Backup an HDS Open Series Machine
How to Restore an HDS Open Series Machine

HDS Installation Open Series Controller: Before you begin this installation, please consult with a Techno CNC Systems Service Department Engineer.
Please click here to begin download. (227 MB zip)
 
 
“10 Series”
 
HD Machine
(System — Restore to Default)
HD Standard
HD4848 • HD4896 • HD60120		 HD Mini
 		 HD Mini
Tabletop		 HD Mini
4th Axis
settings.dat file settings.dat file settings.dat file settings.dat file
Please do this ONLY if it becomes necessary to restore your machine to the factory default settings.

  • Download the settings.dat file for your machine model and save on a Flash Drive.
  • Copy this file from your USB Flash Drive to the USB Port on front panel of the Controller.
    ( HD standard is located on the cabinet front panel — HD Mini is right on the front of the machine)
  • Press the Menu button on your hand-held controller.
  • Select “6. Param Upkeep” and then “5. Import Params”
 
BT1212 Machine
(System — Restore to Default)
BT1212
settings.dat file
 
Please do this ONLY if it becomes necessary to restore your machine to the factory default settings.

  • Download the settings.dat file for your machine model and save on a Flash Drive.
  • Copy this file from your USB Flash Drive to the USB Port on front panel of the Controller.
  • Press the Menu button on your hand-held controller.
  • Select “6. Param Upkeep” and then “5. Import Params”
 
Flashcut
NEW Techno CNC Interface V2015.1
Used with NEW 2015 CNC Controller		 Techno CNC Interface V2015.1 User’s Guide PDF

NEW 2015 CNC Controller Hardware Guide PDF