The Electronic Industries Association developed a standard for a code it
defines as an "interchangeable variable block data format for positioning,
contouring, and contouring/positioning numerically controlled machines". The
standard for this general machine code, known as G/M-Code or, more commonly,
G-Code, is EIA-274-D.
The Techno CNC Control
Software is designed to recognize some of the standard G/M codes. The codes
it supports can be used to revise an existing G-Code (.NC) file or to create an
original file that can be run by the Techno G-Code Interface. The codes that are
recognized by the Techno Interface are listed and described in detail in the G-code
reference. Sample G-Code files can be found in the G-code
examples area. |