Techno CNC Systems
 

Chocking up the Z axis slide is necessary when the Z motor is going to be removed.

The brake on the Z motor and the power of the Z motor when the machine is enabled are all that keep the Z slide from falling.

When the motor is removed, the slide will fall.

To properly and safely chock up the Z slide:

  • Find a thick piece of foam or several flat pieces of cardboard.
  • Place them under the spindle or Z axis
  • Gently lower the Z axis into the foam or cardboard until slight downward pressure is exerted

The axis is now chocked up.

 
Copyright ©  Techno CNC Systems, LLC. All rights reserved.